How To Install Ryzen Cpu Cooler
Easily Install AMD Ryzen CPU and Wraith Prism Cooler
Guide on how to install AMD Ryzen processors and the stock Wraith Cooler included with some of the college end AMD processors. I use the AMD Ryzen seven 3700X. In this video I am using the ASUS Prime X570-P motherboard.
Links below are Amazon paid links to the products in this video.
Buy Your Ryzen CPU
Use one of the links beneath to buy a Ryzen CPU that comes with the Wraith Prism Libation. There is a link to the motherboard I am using. It is one of the best budget boards that volition piece of work. Bookmark this folio and I'll encounter yous when y'all accept the goods! If you're already stocked up lets continue. Watch the video above for a stride-past-step guide with some temperate testing.
- RYZEN 7 3700X: (https://amzn.to/2WiU7Bj)
- RYZEN ix 3900X: (https://amzn.to/2xyzNDG)
- ASUS PRIME X570-P: (https://amzn.to/2SuoEuy)
How to Install Ryzen Processor, Total Time: 10 minutes
i. Lift Retentivity Arm
Identify the Retentivity Arm in the up and downwards position.
2. Handle CPU with Care
AMD processors use a pin based system. They are very fragile. Do not affect the pins or the acme of the CPU. Touching the top of the CPU could add together unwanted oils. This could have negative furnishings with cooling and oestrus transfer.
3. Locate the Triangle on the CPU
Locate the small white triangle on the bottom left of the CPU.
4. Locate the Triangle on the Lath
Once you locate both triangles match them upwardly and use them equally a guide. Match the triangles together in order to properly identify the CPU in the socket of the motherboard.
v. Install AMD Ryzen in Socket
Carefully set the CPU in the socket of the motherboard. It will ready in very easy. You will not demand to push or move it at all. Doing this may impairment the CPU.
6. Push Downwards Retention Arm
This volition ensure the CPU is locked in place. Push the arm down and latch it equally information technology was under the pocket-size plastic tab.
7. Check for Thermal Paste
The AMD Wraith Prism Cooler has pre-applied thermal paste. You lot can see the image higher up for verification. Make sure it looks to be in expert shape and free of any debris.
8. Install with Logo on Top
When you place the cooler on the board make sure the logo is on the top. In some cased you lot may desire in install it on the bottom for cable management reason depending on your lath.
ix. Hook Non-Clamping Side
Boards made for this CPU and Libation will feature hooks that make installing this Wraith easy. Hook the non-clamping side starting time.
x. Hook the Clamping Side
The side with a clamp with accept some give so you are able to move it over the hook. Ensure both sides are hooked and the libation is straight and even.
xi. Lock Down the Lever
Every bit presently as information technology's clipped onto the non-lever side, you push button down (LIGHTLY) on the top of the fan, then apply even pressure level to the whole length of the lever and lock information technology into place.
12. Ensure it is Completely Locked
Encounter image above and verify you lot've completed this step.
Locate the CPU fan header and connect the cable. Refer to your motherboard manual if necessary.
fourteen. Connect the RGB or USB Cablevision
In about cases the USB connector will work fine. Depending on your setup you lot may want to utilize the RGB cablevision. Watch the video and checkout the post below for more details on these 2 options.
https://forums.tomshardware.com/threads/amd-wraith-prism-rgb-and-usb-connectors.3479751/
Congratulations! Enjoy your new system. Check out the video for some temp checks at the end and a overview of the RGB features. Also bank check out this article on Chore Manager for some cool subconscious features!
When installing the processor be sure non to touch or harm any of the pins.
Source: https://techhut.tv/install-amd-ryzen-cpu-and-wraith-prism-cooler/
Posted by: hendersontriessir1989.blogspot.com
0 Response to "How To Install Ryzen Cpu Cooler"
Post a Comment